EventPro® 3m x 6m Commercial Aluminium Gazebo Frame (50mm Hex Legs)

EventPro® 3m x 6m Commercial Aluminium Gazebo Frame (50mm Hex Legs)

A reinforced aluminium gazebo frame with a 3m x 6m footprint, 50mm hexagonal leg profile, and pop-up concertina folding system. The frame weighs 47kg and ships in a 158 x 33 x 59cm carton. Canopy, walls, and weight bases are sold as separate items.

The 3m x 6m frame provides 18 square metres of covered floor space when fitted with a canopy. This is double the coverage of the 3m x 3m frame, suitable for larger market stalls, food preparation areas, registration zones, and corporate branding installations.

Construction

The frame is reinforced aluminium throughout. The 50mm hexagonal leg profile provides the torsional rigidity needed to support a 6-metre canopy span under wind loading. Aluminium resists corrosion from rain exposure and maintains structural integrity through years of outdoor deployment.

All joints use reinforced brackets with locking pins. The roof truss distributes canopy tension across multiple attachment points, preventing localised stress that would tear fabric or bend struts. The feet accept weight bases (15kg steel) or ground stakes depending on the surface.

Pop-Up Deployment

Two people deploy the frame from storage bag to standing position in under three minutes. The concertina system means no loose parts, no tools, and no separate components to misplace. Extend, lock, and the frame is ready. At 47kg, the frame requires two people to carry and position.

Compatibility

Accepts EventPro® 3m x 6m canopies and wall sets (sold as separate items). Use six 15kg steel weight bases (sold as single units) for ballast on hard surfaces. For soft ground, the feet accept standard ground stakes.

Transport and Storage

The frame collapses into its carry bag at 158 x 33 x 59cm. It fits in the back of a standard van or estate car. Store flat on racking or upright against a wall.

Buying in Bulk

If you buy 10, 25, or 50 large frames for a venue group or local authority, map the full stock flow before the first delivery. A 3m x 6m frame folds down for transport, but the length and mass still shape how crews lift, rack, and load it. Buyers who assign one frame to each team, label each unit, and store spares by bay spend less time sorting mixed parts during a busy season.

You should also plan the rest of the system around the frame. Each bay needs the matching canopy, wall set, ballast, and any lighting or heater kit you use on site. Teams who keep the frame on its own trolley and strap the fabric set beside it cut handling steps and lower the risk of a crew leaving with the wrong roof size.

Layout Planning and Venue Use

A 3m x 6m footprint gives you 18 square metres, enough room for a long bar, a pair of service tables with a rear work lane, or a registration zone with queue space under cover. For seated use, buyers can place two short rows of café tables or a narrow seminar line inside, but most teams use this size as a work bay, shelter line, or hospitality zone rather than as the main dining room. In a 100 person event, one 3m x 6m gazebo can cover check in, AV prep, or buffet service with space left for staff movement.

Keep room around the bay. Many site teams leave at least 1.2 metres on main routes and more near fire doors, food service corners, and public queues. If you link two frames end to end, draw the guest path first, then place the bays so people do not cut behind service tables or trip over ballast at the corners.

Pairing and Structural Detail

Buyers pair this frame with the EventPro® 3m x 6m canopy and wall set, six weight bases, gutter strips for linked runs, and site heating or lighting where the brief calls for longer dwell time. This setup suits corporate roadshows, council outreach, school fairs, NHS advice points, food festivals, and wedding back of house service zones. It also sits well beside EventPro® 3m x 3m gazebos for ticket desks or side stalls.

Staff keep the frame straight when they open it on level ground, clear grit from the sliders, and close it with two or more people rather than forcing one corner ahead of the rest. The 50mm hex legs and reinforced truss spread roof load across a broad base, which helps crews keep the long span square while they tension the canopy. Buyers still need proper ballast on each leg, because no frame shape can replace site discipline in wind.

• Material: reinforced aluminium
• Leg profile: 50mm hexagonal
• Footprint: 3m x 6m (18 sq metres)
• Weight: 47kg
• Deployment: pop-up concertina fold
• Shipping carton: 158 x 33 x 59cm
• Canopy, walls, weights: sold as separate items
• Part of the EventPro® range